| 10" Big Blue UV Ozone Generator. The 10" Big Blue Ozone contains 4 UV-C germicidal bulbs with 3 different control settings. This 10" Big Blue Ozone decontaminates up to 1500 sq. ft.. 3000 mg/hr. 20" long x 10" diameter.
Big Blue Ozone Generator fulfills two purposes:
- Eliminates odor in your Hydroponic indoor gardening area created by plants, reservoirs, mold and nutrient solution.
- Sterilizes the grow room by eliminating pests and mold. The ozone gas gets into every crack and crevice, out-killing every chemical based product. Use for 5 hours at the end of the plant growing cycle to remove pests and mold.
Big Blue Ozone products are very lightweight (the 10" weighs 13 pounds), making installation much easier than inline carbon filters, which can weigh over 100 pounds and need replacing every 12 months.
The control settings allow you to burn bulbs individually. Early in the grow cycle, when odor levels are at their lowest, only one bulb may be required. As your plants mature and the odor increases, the Big Blue has built-in switches that allow you to turn on bulbs as required. These controls will save on bulb usage, which will save the life of your bulbs.
The only part on your Big Blue Ozone that will need replacing is the UV-C germicidal bulb. With continual use, the bulb will last 14-18 months. Since the Big Blue is keyed to the exhaust system, therefore does not run constantly, the bulbs generally will last 2 years. To ensure adequate odor protection, it is recommended to replace bulbs every 18 months. Quite the back and dollar savings from replacing inline carbon filters yearly.
Heavy duty Big Blue Ozone products feature a highly polished stainless steel housing (amplifying ozone output) and multiple UV-C germicidal lamps. Each is individually controlled for unrestricted removal of heat associated with multiple high wattage grow lights, allowing fully adjustable ozone output. This fail-safe feature means you are never without odor control.
Great for larger spaces and faster results in smaller spaces. These ozonators are not affected by high humidity levels and fit conveniently into your duct system with hanging eyelet supports and prepunctured mounting holes.
|
